UNITEK OT1091ATP01 RJ45 Cat 6 Pass-Through Connectors 100 Pieces, Gold-Plated 3-Point Staggered Contacts, Easy Wire Alignment, T568A and T568B Compatible for Cat6, Cat5e and Cat5 UTP Cables – Transparent

Faster and More Accurate RJ45 Cable Termination

The UNITEK OT1091ATP01 RJ45 Cat 6 Pass-Through Connector is designed to simplify custom Ethernet cable termination for professional installers, IT technicians and users building their own network cables.

Unlike conventional closed-end modular plugs, its pass-through construction allows all eight Ethernet conductors to extend through the front of the RJ45 connector before crimping.

This design makes conductor order easier to inspect and allows installers to confirm the wiring sequence before completing the termination.

The transparent connector body further improves visibility during cable preparation.

This makes the OT1091ATP01 particularly useful when preparing multiple network cables where consistency and efficient termination matter.

When searching for the Best Cat6 Pass-Through RJ45 Connectors in Pakistan, the UNITEK OT1091ATP01 offers a practical combination of pass-through termination, transparent construction, staggered contacts and bulk packaging.

Check the UNITEK OT1091ATP01 Price in Pakistan for exceptional value.

Gold-Plated 3-Point Staggered Contact Design

Reliable Ethernet termination depends on proper electrical contact between the plug and individual cable conductors.

The UNITEK OT1091ATP01 uses gold-plated 3-point staggered contacts designed to establish secure conductor contact after proper crimping.

The staggered contact arrangement helps organize the conductor termination points while reducing unnecessary overlap inside the modular connector.

Key construction advantages include:

• Gold-plated contact surfaces
• 3-point staggered contact structure
• Corrosion-resistant contact design
• Secure conductor termination
• Transparent connector housing
• Clear visibility during wire insertion
• Suitable for repeated professional installation work

Correct cable preparation and crimping remain essential for achieving a reliable network connection.

Cat6, Cat5e and Cat5 Cable Compatibility

The OT1091ATP01 is designed for commonly used Ethernet networking cables and supports Cat6, Cat5e and Cat5 UTP cables within the specified conductor range.

It supports 23 to 26 AWG solid and stranded conductors, making the connector suitable for a variety of compatible Ethernet cable installations.

Typical applications include:

• Home Ethernet networks
• Office structured cabling
• Network cabinets
• Server rooms
• IT workshops
• ISP installations
• CCTV network infrastructure
• Router and switch connections
• Access point cabling
• Gaming network installations
• Custom-length Ethernet patch cables
• Network maintenance and repair

For best results, the cable category, conductor gauge and physical construction should be checked for compatibility before installation.

T568A and T568B Wiring Compatibility

The UNITEK OT1091ATP01 supports both TIA/EIA 568A and TIA/EIA 568B wiring arrangements.

Either wiring scheme can be used when appropriate, but both ends of a standard straight-through Ethernet cable should follow the intended wiring configuration.

T568A Wiring Order

1. White and Green
2. Green
3. White and Orange
4. Blue
5. White and Blue
6. Orange
7. White and Brown
8. Brown

T568B Wiring Order

1. White and Orange
2. Orange
3. White and Green
4. Blue
5. White and Blue
6. Green
7. White and Brown
8. Brown

The pass-through construction makes these color sequences easier to inspect before the final crimp is completed.

Simple Pass-Through RJ45 Installation Process

The pass-through design can make RJ45 termination more convenient when used with a compatible pass-through crimping tool.

A typical installation process includes:

1. Cut the Ethernet cable to the required length.
2. Remove approximately 3 to 4 centimeters / 1.18 to 1.57 inches of the outer cable jacket.
3. Carefully separate and straighten the twisted conductor pairs.
4. Remove unnecessary foil or film where applicable to the compatible cable construction.
5. Arrange the eight conductors according to the required T568A or T568B sequence.
6. Straighten the conductors and prepare them for insertion.
7. Insert all eight conductors through the RJ45 pass-through connector.
8. Visually confirm the conductor sequence through the transparent housing.
9. Insert the connector into a compatible pass-through RJ45 crimping tool and complete the crimp.
10. Inspect the finished termination and test the cable before deployment.

A network cable tester should be used after termination whenever possible to confirm conductor continuity and correct pin assignment.

100-Piece Bulk Pack for Professional Networking Projects

Each package contains 100 UNITEK OT1091ATP01 RJ45 Cat 6 Pass-Through Connectors.

The bulk quantity is particularly useful for installers working on multiple Ethernet drops or regularly producing custom network cables.

The pack is suitable for:

• Network installation companies
• IT departments
• System integrators
• ISP technicians
• CCTV installers
• Office network projects
• Data and server environments
• Computer repair workshops
• Home network enthusiasts
• Large structured cabling projects

Instead of purchasing small quantities for every project, the 100-piece package provides a convenient supply of matching connectors for repeated termination work.

For customers comparing RJ45 Cat6 connector prices in Pakistan, pack quantity, conductor compatibility, termination design and contact construction are important factors alongside purchase price.

Buy from the Official UNITEK Store in Pakistan for authentic UNITEK networking accessories. The UNITEK Official Distributor in Pakistan and UNITEK Pakistan Official Store provide customers looking for genuine UNITEK products in Pakistan with a trusted purchasing source.

Products Specifications

• Brand: UNITEK
• Model: OT1091ATP01
• Product Type: RJ45 Cat 6 Pass-Through Modular Connector
• Connector Interface: RJ45
• Connector Category: Cat6
• Connector Design: Pass-through
• Quantity: 100 pieces per pack
• Color: Transparent
• Contact Design: 3-point staggered contacts
• Contact Finish: Gold-plated
• Rated Bandwidth: Up to 1000MHz according to the supplied product specification
• Cable Compatibility: Cat6, Cat5e and Cat5
• Cable Type: UTP
• Supported Wire Gauge: 23 to 26 AWG
• Conductor Compatibility: Solid and stranded conductors
• Wiring Standards: TIA/EIA 568A and TIA/EIA 568B
• Connector Length: 22.5 millimeters / 0.89 inches
• Connector Width: 11.68 millimeters / 0.46 inches
• Connector Height: 7.96 millimeters / 0.31 inches
• Housing: Transparent for conductor visibility
• Primary Feature: Conductors pass through the front of the connector for visual alignment
• Installation Requirement: Compatible RJ45 pass-through crimping tool recommended
• Applications: Home networking, office LAN installations, structured cabling, server rooms, ISP work, CCTV networks and custom Ethernet cables
• Warranty: 12 months in Pakistan

Important Notes

• These connectors are specified for Cat6, Cat5e and Cat5 UTP cables.
• Check the Ethernet cable conductor diameter and construction before installation.
• Supported conductor range is 23 to 26 AWG according to the supplied specification.
• Correct conductor sequence is required for reliable termination.
• Use the intended T568A or T568B wiring arrangement consistently.
• A compatible pass-through RJ45 crimping tool is recommended.
• Test completed Ethernet cables before permanent deployment.
• These modular plugs are intended as single-use crimp connectors.
• Shielded Cat6a and Cat7 cables may require connectors specifically designed for their shielding and conductor dimensions.

What’s in the Box

• 100 x UNITEK OT1091ATP01 RJ45 Cat 6 Pass-Through Connectors – Transparent

Frequently Asked Questions

Q1: What is a pass-through RJ45 connector

A: A pass-through RJ45 connector allows the individual Ethernet conductors to extend through the front of the modular plug before crimping. This makes it easier to visually inspect the conductor order and alignment before completing the termination.

Q2: Which Ethernet cables are compatible with the UNITEK OT1091ATP01

A: The supplied specifications identify compatibility with Cat6, Cat5e and Cat5 UTP Ethernet cables using compatible 23 to 26 AWG solid or stranded conductors.

Q3: Does the OT1091ATP01 support T568A and T568B wiring

A: Yes. The connectors support both TIA/EIA 568A and TIA/EIA 568B wiring arrangements, allowing them to be used with standard Ethernet termination practices.

Q4: What type of crimping tool is required

A: A compatible pass-through RJ45 crimping tool is recommended. The tool should properly crimp the connector contacts and trim the conductors extending through the front of the plug according to the tool design.

Q5: Why does this RJ45 connector use gold-plated contacts

A: Gold-plated contact surfaces provide good electrical conductivity and resistance to corrosion. The OT1091ATP01 also uses a 3-point staggered contact design for secure conductor termination.

Q6: How many RJ45 connectors are included in one package

A: Each package contains 100 UNITEK OT1091ATP01 Cat 6 Pass-Through RJ45 Connectors, making it suitable for professional installers, IT departments and larger networking projects.

Q7: Can these connectors be used to make custom-length Ethernet cables

A: Yes. They can be used to terminate compatible bulk Cat6, Cat5e or Cat5 UTP Ethernet cable, allowing installers to create cables in the required length for home, office and professional network installations.

Q8: Can the OT1091ATP01 be used with Cat6a or Cat7 cable

A: The supplied compatibility specification lists Cat6, Cat5e and Cat5 UTP cables. Cat6a and Cat7 cables can have different conductor dimensions and shielding requirements, so connectors specifically designed for those cable types should be selected instead.

Q9: Can an RJ45 connector be reused after it has been crimped

A: No. A crimp-style RJ45 modular connector should be treated as a single-use termination component. If the wiring sequence or termination is incorrect, cut off the connector and install a new one.

Q10: Where can I buy UNITEK OT1091ATP01 RJ45 connectors in Pakistan

A: The UNITEK OT1091ATP01 Price in Pakistan can be checked through the Official UNITEK Store in Pakistan. Buying through the UNITEK Official Distributor in Pakistan or UNITEK Pakistan Official Store provides a trusted source for genuine UNITEK networking products with the stated 12-month warranty in Pakistan.